Antisleep driving alarm S.O.S Anti-fatigue Pro

Anti-sleep driving alarm is a life saver device designed to keep you awake during momentary lapses caused by sleepiness and tiredness, it works by detecting when the user’s head nods while driving which indicates that they may be feeling drowsy. It alerts with strong vibration or a beep, or both vibration and been depending on the mode selected.

Get Started

If you are using driver anti-sleep alarm for the 1st time, please fully charge the device for at least 30 minutes. To charge the anti-sleep alarm / driver fatigue alarm use the charger cable provided and then connect the mains charger unit for wall, PC or car charger, depending whichever is suitable. The bicolour indicator light turns red during charging and it will be off when the battery is full.

How to use?

1) The alarm is designed to be worn on your right ear.

2) Hold the button for 3 seconds to turn on the Driver anti-sleep alarm / driver fatigue alarm.

3) Switch the alarm to the mode which you need. Beep, Vibrate, or Both
.
4)Put the alarm loop around your ear so that the alarm body is behind your ear. Please see the picture.

5) Move head to upright position after placing the alarm behind your ear.

6) Start to bend your head forward (nodding) not more than 15-20 degree until it works.

7) Remove device and turn it off when not in use.

8) If you stop using it for a brief period you can switch it to power save mode / sleep mode.

Turn On & Off the power save mode for Driver anti-sleep alarm / driver fatigue alarm:

Turning On:

Press and hold the button for 3 seconds until you see 3 blue flashes on the indicator light then release. You will see the blue LED flash 1 time per 5 seconds.

Turning Off:

Press and hold the button for 5 seconds until you see 5 blue flashes on the indicator light then blue led switches off. Now your alarm is off.

How to change Alarm Mode?

Beep Alarm Mode: Press the button briefly the bicolour indicator light turns blue and it flashes once every 3 second. This will enable the Beep alarm.

Vibration Alarm Mode: Press the button briefly the bicolour indicator light turns blue and it flashes twice every 3 second (means bit faster). This will enable the
Vibrate alarm.

Beep & Vibration Mode: Press the button briefly the bicolour indicator light turns blue and it flashes thrice (3) every 3 second (means faster than before). This will enable the Beep +Vibrate alarm mode.

How to recharge?

Low Power: The blue LED flashes 3 times every 2 seconds and the beep would sound 3 time every 2 seconds. This indicates that the power is low.
Then Recharge the battery:

Option 1:
Connect the car charger provided with the charger to your car/truck charging socket then connect the USB to the anti sleep alarm. The bicolour indicator light will turn red during charging, this light will be off when the battery is full.

Option 2:
Connect the charger to the wall plug using multinational adapter. Then connect the USB recharger cable to the anti fatigue alarm / anti sleep alarm. This is similar as you put your cell phone on charge.

Option 3:
CAT-LGIII alarm can be charged by also using USB charge cable (provided with the alarm) and connecting it to one of your USB port on your Computer, Laptop, or TV. This is same as charging your Iphone or any android phone.

However we are not responsible for any type or kind of damage caused to other products by any means due to the use of our USB charger.